The history of the telescope makes for interesting reading from a theoretical perspective, but also from the perspective of someone interested in beginning to make a telescope. During the development of the telescope, practical experiments with reflectors had already begun in 1639, but it was not until 1663 that they gained any prominence.
The Gregorian Telescope
In that year a Scottish mathematician, James Gregory, at the age of 24, published a treatise entitled Optica Promota. In this he gave a description of a compound reflecting telescope employing two concave specula (metal mirrors). The larger one was to be perforated, and to have a paraboloidal surface; the smaller was to be ellipsoidal. High magnification could be had with this instrument, the second reflection amplifying the focal length of the primary in the ratio of fs to Fs.
He began to make telescopes, but whatever chance it may have had of performing creditably was lost by polishing the speculum on a cloth lap – putty (tin oxide) being used as the polishing agent. The unyielding lap was an insurmountable barrier to parabolizing, interest apparently ebbed, and about 60 years were to elapse before a workable model was finally produced.
The Cassegrainian Telescope
Sieur Cassegrain, a Frenchman, in 1672 designed a second compound reflector, differing from Gregory’s in that it employed a convex secondary, to be of hyperboloidal figure, placed inside of the focus of the paraboloidal primary .
While the Gregorian is seen to be capable of higher magnification, all that is necessary can be had from the Cassegrainian, and it has the advantage of being a much more compact instrument. Although little was heard of this telescope for the next two centuries, it is worth observing that it survived the Gregorian, and is still widely used in observatories. This is a good place to begin it you decide to make telescopes of your own.
The Newtonian Telescope
The history of the telescope takes an interesting turn at this point. In the same year, Newton designed and began to make telescopes that had two small reflectors, of the type so popular with amateur astronomers today and which still bears his name. They were not large, as we know telescopes today, the effective apertures of the concave specula being about 1 1/3″. Their focal length was 6″, making the focal ratio f/4.5.6
Newton, according to his Opticks (1704), polished his specula on pitch, using putty as the polishing agent. His methods were ingeniously calculated to yield a spherical surface, and it is quite probable that a close approach to that figure was attained. But the performance of even a spherical mirror of the proportions of Newton’s could hardly be satisfactory because of the great amount of spherical aberration present.
Although Newton thought that his mirror might fail of good definition, he “despaired of doing the work” (parabolizing the speculum), yet he “doubted not but that the thing might in some measure be accomplished by mechanical devices.”
It might be concluded that if the center of the mirror were properly deepened, that is, given a shorter radius, or if the radii of the outer zones were progressively lengthened, or if a little of each were done, all the reflected rays could be brought to a common focus. That is a practical solution, and the resulting surface in each instance is a paraboloid.
The standard practice is to deepen the spherical mirror so that, for a 6-inch f/8 mirror, the glass removed in the operation is but half a wave length of light in thickness at the center. Incredible though it seems, this represents the difference between poor and good definition.
The single-lens eyepiece of Kepler’s had already been improved, with the addition of another element, by Christian Huygens, a Dutch astronomer and mathematician, about the year 1650. The field lens, like Galileo’s concave lens, is placed before the focal plane of the objective. As it is convex, however, it further converges the rays to form’ a slightly smaller image in a new focal plane, which is then magnified by the eye lens. Thus, a much wider field of view is encompassed by the eyepiece.
These were important developments in the history of the telescope on the way to our present-day powerful telescopes. Today telescopes of the size and technicality used by NASA experts are out of an amateurs grasp (and price range), but an amateur can easily begin to make telescopes of the kinds mentioned above both inexpensively and easily. Provided you have a little patience.
4 bladed Universal Speculum
GRAVES Large VAGINAL SPECULUM – Stainless Steel – Fully Adjustable to 3-1/2″ NEW
